Tips for using motor automation equipment mainly include the following aspects:
Daily maintenance and care:
Equipment cleaning: Remove dust, oil, chips and other dirt on the surface of the equipment, check whether there are damage, cracks, deformation and other conditions inside and outside the equipment, and deal with any abnormalities in time. Wipe the equipment rails, sliding surfaces and other parts to keep the equipment clean, and clean the environment around the equipment to keep the workplace clean.
Equipment lubrication: Add oil or change oil on time to ensure that the equipment lubrication system works properly. Check the lubrication parts such as oil marks, oil guns, oil cups, and oil felt, keep them clean, check the lubrication system, ensure that the oil circuit is unobstructed, and the oil quality is qualified. If the oil quality is found to be deteriorating, it should be replaced in time.
Equipment inspection: Check whether all parts of the equipment are intact. If there are damaged or severely worn parts, they should be replaced in time. Check whether the safety protection devices of the equipment are reliable. If there are any abnormalities, they should be repaired in time. Check the electrical system of the equipment to ensure that the cables, connectors, switches and other components work properly.
Operation skills:
Parameter setting: Set the winding parameters (number of turns, speed, etc.) of the winding machine according to the product specifications, and use the operation panel to set the number of winding turns, tension, stop point and other parameters. Perform pre-debugging to ensure that the winding path is accurate.
Startup and monitoring: Turn on the automatic operation mode and the winding machine starts working. Monitor the winding process to ensure that there is no broken wire, overlap or looseness.
Finished product inspection and adjustment: Take out the wound coil after shutdown and check the winding quality. If any abnormality is found, adjust the equipment parameters in time.
Fault diagnosis and troubleshooting:
Fault diagnosis: Check whether all parts of the equipment are intact. If there are damaged or severely worn parts, they should be replaced in time. Check whether the safety protection device of the equipment is reliable. If there is any abnormality, it should be repaired in time. Check the electrical system of the equipment to ensure that the cables, connectors, switches and other components are working properly.
Professional maintenance: Equipment maintenance should be carried out by professionals, and do not disassemble and repair by yourself. Once a device failure is found, it should be stopped immediately for inspection, find out the cause of the failure, and repair it in time.
