The maintenance cycle of winding machine mainly includes two aspects: regular maintenance and regular replacement of parts.
Regular maintenance
Daily inspection: It is recommended to check all parts of the equipment every week, including motor, wire guide, winding reel, etc., to ensure that there is no abnormal sound or odor, and observe whether the instrument display is normal.
Cleaning and maintenance: Clean the surface of the equipment regularly to avoid dust accumulation. Compressed air or dry cloth can be used to clean the surface of the equipment, especially the cleaning of the winding reel and transmission parts.
Lubrication maintenance: Select suitable lubricating oil and lubricate according to the recommendations in the equipment manual. It is generally appropriate to add lubricating oil once every three months, but in the case of frequent use of the motor, it is recommended to add it monthly.
Regular replacement of parts
Wear-resistant parts such as bearings and transmission belts: It is recommended to check them every six months to check their wear. If severe wear or abnormal noise is found, be sure to replace them in time.
Lubricating oil: Replace the lubricating oil every three months, and increase the replacement frequency in time according to the usage.
Maintenance precautions
5S daily maintenance: including inspection and cleaning of winding machine terminals, fixing screws, transmission devices, bearing devices, etc. Special situation handling: when encountering special situations, it is necessary to increase the maintenance frequency. Safe operation: comply with the safe operation rules of the automatic winding machine to ensure the safety of the machine.
